+31 6 21 86 77 55

2001
1. TNO Automotive – Influence of the Strain Rate on the Deformation Behaviour of Four Different Steel Qualities (1 month)

2002
1. FMLC / Airbus – High Strain Rate Test Program on Glare (2 months)

2003
1. TNO / Defensie Materieel Organisatie – Tensile Tests on Bulkhead – Deck Joints: Experimental Results (3 months)
2. TNO / Defensie Materieel Organisatie – The Influence of Fragment Perforations on the Failure Behaviour of Steel Plate (2 months)
3. Delft University of Technology – Microscopic Research on Donkin Pressure Valve (report in Dutch: Microscopisch onderzoek Donkin drukregelaars) (1 month)
4. Lightweight Structures B.V. – High Strain Rate Tensile Tests on GMT and Twintex (1 month)
5. Lightweight Structures B.V. – Tensile Tests at Low and High Strain Rates on Simson ISR 70-05 Adhesive (1 month)

2004
1. TNO / Defensie Materieel Organisatie – Tensile Tests on Bulkhead – Deck Joints, Microscopic and Numerical Analysis (3 months)
2. TNO / Defensie Materieel Organisatie – Implementation of a Dedicated Element in LS-Dyna for Failure Prediction of Welded Structures (2 months)
3. Samson – Strength Calculations on Trash Can Center and Bicycle Stand Support (report in Dutch: Sterkteberekeningen aan afvalbak center & fietsenrek support) (1 week)
4. Sport Import Europe – Failure of the Ironman Duffle Bag (1 week)
5. TNO / Defensie Materieel Organisatie – Numerical Failure Analysis of Tensile Tests on Bulkhead – Deck Joints (2 months)
6. TNO / Royal Netherlands Air Force – Failure Model for Explosion Loaded Perforated Aluminum Plate – Part 1 (4 months)

2005
1. TNO / European Launch Vehicle (ELV), Italy – Vega HSS Analysis (3 months)
2. FMLC – High Strain Rate Behaviour of Aluminum and FM-Prepregs (1 month)
3. TNO / Defensie Materieel Organisatie – Fracture Analysis for Proximity Explosions on Structural Steel Plate (1 month)
4. TNO / Royal Netherlands Air Force – Failure Model for Explosion Loaded Perforated Aluminium Plate – Part 2 (5 months)

2006
1. Provincie Zeeland / Vopak – Failure Analysis of a Tank Car by Wind Turbine Blade Impact (report in Dutch: Faalanalyse van een tankwagon tijdens de inslag van een windmolenwiek) (3 months)
2. FMLC – High Strain Rate Behaviour of GF Prepreg (1 month)
3. TNO / Defensie Materieel Organisatie – Numerical Modelling of Plastic Deformation at Welds of Blast Loaded Bulkheads (2 months)
4. TNO / Royal Netherlands Air Force – Failure Model for Explosion Loaded Perforated Aluminium Plate – Part 3 (4 months)

2007
1. TNO / LSCT – Non-Local Material Model in LS Dyna and an Implementation of the RTCL Failure Model 
(2 months)

2008
1. TNO / Shell – Drilling Tube Analysis (1 month)
2. Havenbedrijf Amsterdam / Vopak – Failure Analysis of a Storage Tank by Wind Turbine Blade Impact (report in Dutch: Faalanalyse van een opslagtank tijdens de inslag van een windmolenwiek) (2 months)
3. TNO / Defensie Materieel Organisatie – Joint Support Ship Blast Bulkhead Analysis (2 months)
4. TNO – Failure Model for Perforated Steel Plates under Blast Loading – Dedicated Element Failure Model 
(2 months)
5. TNO / Dutch Space – Mechanical Testing of Ariane 5 Motor Frame (4 months)

2009
1. TNO / Bluewater – Ship Accommodation Blast Protection Analysis (2 months)
2. TNO / BASF Germany – Review of the BASF Design Guideline for Tubes Subjected to Internal Detonation – The Structural Response (8 months)
3. TNO / Yara – Blast Response and Failure Analysis of a 40 kMT Ammonia Storage Tank (2 months)
4. TNO – Low and high strain rate tensile test results of Al2024-T3, FM94 S2-glassfiber composite and Glare (2 weeks)
5. TNO – High Strain Rate Tests on Elastomers (2 weeks)

2010
1. TNO / FN Herstal – High Strain Rate Tests on Gel Material (2 weeks)
2. TNO – Failure Prediction of a Welded Plate under Combined Bending and Tensile Load (2 months)
3. TNO – Kobelco, Technip, ExxonMobil Refinery Beaumont – New 2nd stage silencer design – Structural Integrity assessment of internals and mechanical vibration transfer (3 months)

2011
1. Nedal Aluminium – Tensile Tests on AA6063 T6 ; AA6005A T4 (extruded profiles) and EN AC 43000/43100 T6 (casting product) (1 week)
2. TNO – Synbone Tensile Tests (1 week)
3. TECOSIM Japan Ltd / Honda Japan – SINCAP Barrier Test Program (2 months)
4. TNO / SBM Offshore – Blast Response Analysis UNIT 360 Flash Gas Compression Barges 3, 4 & 16 – Air Cooler Buildings (3 months)
5. TNO – Experimental and Numerical Failure Analysis for Welded Plates under Combined Bending and Tensile Loading (2 months)
6. DAF – Tensile Tests at Varying Strain Rates on Imaform W, Bolt Steel, GG40 and GG50 (2 weeks)
7. Nedal Aluminium – Tensile Characterisation of AL 6xxx Extrusion with and without a Central Weld Seam 
(2 weeks)

2012
1. LDM – Measurement of Elasticity Constants for C673 (CuZn36Mn3Si) (1 week)
2. Flevo Engineers / Vink Kunststoffen – 3-point Bending Tests on Vikucore Sandwich Plate (report in Dutch: 3-Punts buigproeven op Vikucore sandwich plaat) (1 week)
3. TNO / BASF Germany – Elastic-Plastic Structural Response of Tubes Subjected to Internal Detonations 
(8 months)
4. Ingenieursbureau H.E.C. / Moog – Crash Tube Analysis (1 month)
5. Ingenieursbureau H.E.C. / Kenz-Figee – Blast Response Analysis for an Offshore Pedestal Crane (2 months)

2013
1. TNO / Damen Shipyards Group / Defensie Materieel Organisatie – Concept Design of a Non-Continuous Blast Resistant Bulkhead (2 months)
2. TNO / Defensie Materieel Organisatie – Study on In-Plane Boundary Stiffness of Blast Loaded Bulkheads (3 months)
3. TNO / Defensie Materieel Organisatie – Design of a Non-Continuous Blast Resistant Bulkhead and Test Specimen (2 months)

2014
1. TNO / Defensie Materieel Organisatie – FEM Analysis of Ship Failure Behaviour by an Internal Explosion 
(2 months)
2. TNO – 2D and 3D Meshing of Small Calibre Ammunition (2 months)
3. Bluewater – FPSO Swivel Stack Engineering (10 months)

2015
1. TNO – Experiments on the Failure Behaviour of Double Fillet Welded Plates for Combined Tensile and Bending Load (2 months)

Publications
H.P. Schildberg, J.P.M. Smeulers, G. Pape, Experimental Determination of the Static Equivalent Pressures of Gas Phase Detonations in Pipes and Comparison with Numerical Models, PVP2013-97677, Proceedings of the 2013 Pressure Vessels & Piping Conference, July 14-18, 2013, Paris, France.

J.P.M. Smeulers, G. Pape, N.E. Ligterink, Modeling of the Effect of Plasticity on the Response of Pipe Systems to Internal Explosions, PVP2012-78482, Proceedings of the 2012 Pressure Vessels & Piping Conference, Toronto, Canada.

J.P.M. Smeulers, G. Pape, Design Rules for Pipe Systems Subject to Internal Explosions, Proceedings of the 2010 Pressure Vessel & Piping Conference, July 18-22, 2010, PVP2010-25695 (Part 1) & PVP2010-26177 (Part 2).

G. Pape, A.G. van Erkel, Fracture of Welded Plates: An Experimental and Numerical Study, proceedings of the IX Int. Conf. on Computational Plasticity, 5-7 sept. 2007, Barcelona, Spain

G. Pape, A. van Erkel, E. van Meerten, Failure Prediction of Aircraft Structures under nearby Warhead Explosion Loading, 3rd European Survivability Workshop, 16-19 May 2006, ENSICA – Toulouse, France

Talonen, J., Nenonen, P., Pape, G., Hänninen, H., Effect of Strain Rate on the Strain-Induced γ→α’-Martensite Transformation and Mechanical Properties of Austenitic Stainless Steels, Metallurgical and Materials Transactions A, Vol. 36A, pp. 421 – 432, 2005.

Pape, G., Flow stress and ductile failure at varying strain rates, Ph.D. thesis, Delft University of Technology, Delft, The Netherlands, 2003

Pape, G., Janssen, M., Bakker, A., Prediction of Ductile Fracture of High Rate Loaded Steel Structures, Proc. of the 14th European Conf. on Fracture ECF14, Cracow, 8 – 13 September 2002

Pape, G., Bakker, A., Janssen, M., Vervorming en Breuk van Staal door Explosies, Materialen en Processen, nr. 2, maart/april 2002, pp. 23 – 26

G. Pape, A. Bakker and M. Janssen, Flow Stress of Steel at Large Strains and High Strain Rates, Proceedings of the 10th Int. Conf. on Fracture (on CD ROM), Honolulu, Hawaii, 2001

G. Pape, A. Bakker and M. Janssen, Fracture Predictions for Ductile Steel, Proceedings of the 10th Int. Conf. on Fracture (on CD ROM), Honolulu, Hawaii, 2001

G. Pape, A. Bakker and M. Janssen, Damage Evolution in Ductile Steel, Materials Science Research International, Special Technical Publication – 2, The Society of Materials Science, Japan (JSMS), pp. 317 – 322, 2001

G. Pape, A. Bakker, An Optical Technique for High Rate Strain Measurement, Proceedings of the International Workshop on Video-Controlled Materials Testing and In-Situ Microstructural Characterization, 16-18 November, 1999, Nancy, France

G. Pape, A. Bakker, High Rate Deformation Behaviour During Explosion Loading of Steel, Proceedings of EFC 12, M.W. Brown, E.R. de los Rios, K.J. Miller (Eds.), Vol. 3, 1998, pp. 1343 – 1348

Our adress: Gorterlaan 8 | 2662 AE Bergschenhoek | The Netherlands | Phone: +31 6 21 86 77 55 | E-mail: informatie@dtrl.nl